aquabionic fins spotted with the US Navy and Coast Guard divers participating in ICEX 2016


ARCTIC CIRCLE (March 13, 2016) Navy divers, assigned to Mobile Diving and Salvage Unit 2, along with Coast Guard divers complete an ice dive in the Arctic Circle during Ice Exercise (ICEX) 2016. The five-week exercise is designed to research, test, and evaluate operational capabilities in the region. ICEX 2016 allows the U.S. Navy to assess operational readiness in the Arctic, increase experience in the region, advance understanding of the Arctic environment, and develop partnerships and collaborative efforts. (U.S. Navy video/Released)

Distribution Partnership Announcement

CETATEK announces distribution partnership of aquabionic products with Beuchat International

– Visit DEMA Show Booth 2139








CETATEK Products Inc. of British Columbia, Canada, developer of the aquabionic fins and patented warp™ technology, announces a distribution partnership with Beuchat International of France, a leading European dive equipment producer with a history of 80+ years of innovation in underwater sports.

“We are thrilled to see our warp™ technology recognized by one of the great companies in the dive industry, especially one with such a history and vision for innovation” said Jan Ortwig, President and CEO of CETATEK.

CETATEK Products Inc. will continue their sales and distribution of the aquabionic fin and other aquabionic products in North America, Mexico and parts of the Caribbean.
Beuchat International will handle worldwide distribution of aquabionic fins outside of the CETATEK sales territory. Read more

What is the difference between warp1 and aquabionic1?


The warp 1 was our first generation and first production run, made in China, and sold between 2013-2014. It is equipped with adjustable rubber straps with fast-ex buckles. There is a warp 1 marking on the membrane. Available in the colors Black, Blue, Yellow, Red and 3 Sizes (Small, US 6-8),(Regular, US 8-10), (XLarge, US 10-12+).

aquabionic 1

The aquabionic 1 was our second production run with improved materials, made in China, and sold between 2014-2016. It is equipped with universal spring straps that give you 3 inches of adjustment. There is a “1” marking on the membrane. Available in the colors Black, Blue, Yellow, Red, White, Pink, Orange and 3 Sizes (Small, US 6-8),(Regular, US 8-10), (XLarge, US 10-12+).

2017 aquabionic 1

The 2017 aquabionic 1 is produced in Italy and the result of a technology licensing and manufacturing partnership with Beuchat International of Marseilles, France. It is equipped with universal spring straps that give you 3 inches of adjustment. There is a “1” marking on the membrane and the aquabionic logo on the top and bottom of the blade. The initial release of the 2017 aquabionic 1 will be available in colours: Black, Blue, Yellow, Red and 3 Sizes: (Small, US 6-8), (Medium-Large, US 8-10), (XLarge, US 10-12+).

Dare to Compare

Dare to Compare Test dive the “aquabionic1” fin against anything! Take the “Dare to Compare” challenge and test dive our “aquabionic1” fins against anything you can buy, borrow, rent or already own. We know if you try a pair of “aquabionic1” fins you will be blown away by their performance! Local dive dealers all over […]

DIVER MAGAZINE REVIEW – warp speed! The aquabionic warp1 fin

Find the original article HERE.

aquabionic warp1 …a different fin with every kick from aquabionic on Vimeo.

Fins. Not the most exciting piece of dive gear, but definitely one of the most under appreciated. A good pair of fins can make a world of difference to any diver, and the market is some what flooded with options.

The warp1 fin from CETATEK is another ‘revolutionary fin’ with a ‘unique design’. Yeah, we’ve heard it all before. But how good are they really and is there any noticeable difference?

In short: very, and yes.

The warp1 name doesn’t just suggest speed, it’s also a cunning acronym; “water adapting responsive propulsion”. It’s actually a very fitting description of how this fin differs from the many others on the market.

A Y-frame structure with rigid side struts contain a thin but durable membrane that expands when kicked. This membrane expansion provides noticeable, instantaneous thrust and power. Making for a very versatile and powerful fin, that can be used in many scenarios to great effect. Even the United States Navy have been impressed.

DIVER swam with the fins in the warm waters of Okinawa, and the cold waters of British Columbia, where the fins were designed. We dived in drysuits, loaded with weight, steel tanks, pony bottles and camera gear, and we dived in wetsuits with just a few pounds of lead. We dived in high currents such as the Yonaguni Ruins in Japan, but also at more relaxed sites vacation divers yearn for.

And the result? CETATEK’s warp1 fins are responsive, powerful, comfortable and look bad ass.

The fins are easy to put on, shipping with quick release, adjustable, rubber straps as standard. But with the optional extra of steel spring straps. The foot pockets are comfortable and flexible and fit snuggly around the different types of boots we swam with, and are sold in three different sizes.

The warp1‘s come in four different colours; blue, yellow and red – all with a transparent membrane. Then there’s the fourth option of completely black. What the black pair lacks in high visibility, it more than makes up for in pure sexy awesomeness.

In the water the fins are incredibly lightweight, never feeling too bulky or stiff, but at the same time feeling reassuringly more rigid than a split fin.

As soon as you kick they respond. A frog kick is a pleasure, propelling you forward with a surprising surge, and even back finning seemed a little easier than normal. The more traditional ‘flutter’ kick, or the more advanced ‘dolphin kick’ is where you can really feel an increase in power, perfect for those crazy drift dives or long surface swims.

The technology involved in producing fins, specifically the warp1, is mind boggling in depth. The R&D alone would put some hi-tech computer companies to shame. Yet all of this vanishes as soon as you dive with a pair, and rightly so. As a diver on a relaxing vacation dive, or a tech diver on a mission from God, all you want is a responsive, safe, comfortable and efficient pair of fins. warp1 fins deliver.

When diving Port Hardy, British Columbia you need some kick ass fins. As soon as you roll off the boat and onto the famous Browning Wall, you’re picked up and whisked away by an aggressive current. As a photographer, when you’re zooming past a wall and catch sight of a red Irish lord perched amongst the anemones, you can’t resist a shot. You swim as hard as you can against the current, just to grab that one photo. It may only take a few seconds, but it feels like you’re running a marathon, battling against the ocean’s power. This is where the value of good fins is apparent and every penny you spend becomes 100% worth it.

Swimming against strong current is never an easy task. We found the warp1 fins to be a valuable asset to DIVER’s gear bag, helping us enjoy our dives and maximize swimming efficiency.

Fins can often be an overlooked bit of dive gear. Shop around, find a local dealer that sells or rents the warp1, or purchase direct from the website. You won’t be disappointed.

Warp speed? Make it so.

Snorkel Types – What’s Best For You?

Thousands of years ago, someone discovered that if you cut a short length of hollow reed from the riverbank, you could breathe through it and sneak up on people underwater.

Now there are hundreds of models of snorkels on the market with so many gadgets and features it’s hard to make sense of it and choose what’s best for you. Just like with fins, it depends on what you are going to use it for. There are several main categories of snorkel users but there are a  few fundamental things to look for in a snorkel no matter what the end use. First, make sure it has a reasonable bore diameter. One that is too thin or too long can cause CO2 build up, reduce your stamina, make you dizzy, and give you a headache, none of which are fun. Then make sure that the mouthpiece is comfortable and will not exert pressure and give you sores from rubbing. Nearly all snorkels on the market today have a water purge valve at the lowest point on the mouthpiece, to make clearing the snorkel as easy as possible.

“Snorkelers” – probably the largest single group worldwide. They float around on the surface, looking down at the reef, and are usually the least experienced of the all the users. They may never have had any exposure to a dive shop, or had any lessons, and have a relatively low skill and comfort level. Snorkelers love the many styles of “Dry Top” snorkels, as they are almost completely dry, meaning they don’t allow waves splashing over the top of the snorkel to get into the tube. Water down the tube causes the novice to sputter and cough when they inhale it, which is never any fun. The down side to a completely dry snorkel is (Basic physics from your first dive class…) when you actually start to dive down, and reach any depth at all; the dry snorkel’s pressure imbalance because it is sealed at one end, will try to extrude your tongue into the mouthpiece. Not comfortable.

“Free divers” – very often much more skilled than snorkelers, and also may be certified SCUBA  divers taking a break, free divers don’t just float at the surface. They make repeated dives to the depths that the dry top becomes a nuisance, but they still don’t really want a lot of waves coming down the tube. This is where the “Semi-Dry” or “Splash Proof” snorkel top comes in handy. They are designed to deflect most of the water that comes along, and helps prevent those nasty surprises. It is important to keep in mind that any design that resists water flow can also create more air resistance and increase the work of breathing through the snorkel, possibly adding some CO2 build up.

“Scuba Divers” – Many divers today feel that a bulky snorkel dangling off their mask strap throughout the dive is a distraction they can live without, and like the simplest snorkel they can find. Some even are soft enough to roll up and store in a BC pocket, only to be pulled out and attached to the mask in case of emergencies, such as surfacing a long way from the boat or shore, with not enough air remaining to return on SCUBA. These often have no dry or semi dry top treatments at all, but the simplicity makes them compact, foolproof, and there when they are needed. Full circle back to the hollow reed…..

Clearing Your Snorkel

OK, there’s water in your snorkel. Now what?

First, if you are a new snorkeler and didn’t leave the surface, it’s most likely a wave broke over the top of the snorkel, and poured down the tube, or you ducked your head down a little too low, and you probably aren’t expecting it. The first way to avoid that is to EXPECT it to happen, and know what to do.

Even if you have exhaled normally, most snorkels have a pretty small volume, and most of them also have a purge valve in the bottom end, so it really doesn’t take much to blow them clear. At the first hint that water has come down the tube, give a short hard last of air into the mouthpiece. This will almost certainly clear it so you can inhale safely again right away. It’s really a good idea – especially if you have never had any professional instruction – to just stand in chest high water, lean over, take a breath, and duck your head down so the snorkel top is below surface level, and let it fill. (You’ll hear it gurgling in). Lift your head a bit, and then blast it clear. Do this again and again until you are comfortable, and then lie on the surface and repeat. It’s actually very easy.

If you are coming up from a breath hold dive, you probably really want that first breath. In this case, tip your head back a bit – it’s always a good idea not surface fast without seeing what’s overhead – and when just a few feet below the surface, start exhaling a small amount of air into the snorkel. This will displace most of the water in the snorkel. As you break the surface, a short final blast will completely clear the snorkel, and it will be ready for that first inhalation. This works well with snorkels equipped with a purge or without.

Back to Basics – Rinse Your Gear!

A few weeks ago we talked about how the difference between renting gear and buying it can improve your early diving experiences. If you are renting now, you already know that most dive shops that rent gear have a “Bring it back clean” policy and will often add a surcharge if you take rented gear back salty or dirty. They do this because they know that salt and dirt left on gear is not good for it, and shortens its life.

When you have invested more than a few dollars in your own gear, it’s even more important to rinse it as soon as possible after the dive. Watch the experienced camera users, and the better charter boats – they immediately immerse their gear in a freshwater dunk tank before they even take it apart.

Salt water is pretty corrosive stuff, but DRIED salt is both corrosive and abrasive. Dried salt crystals embedded in any fabric part of your gear – wetsuits, drysuits, BCs and webbing – can cause unseen damage, make your gear look old before its time, and cost you money.

At the very least give all the gear a good hosing down with fresh water and hang to dry, hopefully in a cool dark place. (UV is no friend of dive gear either…)  Make sure the dust cap is back on the first stage of your reg, and then leave it in a tub of freshwater for at least the same time at it was in salt – especially if the salt water has dried, because you are back to those salt crystals, and you have to dissolve them.

There are many articles on the net about specifics of rinsing individual pieces of gear, but most of it is common sense. Remember that hot soapy water will wash just about any lubricant off gear, so keep it away from O rings etc. Read the manufacturer’s advice about how to get oil or creosote off your suit – solvent based cleaners can be death to neoprene.

Lastly, one of the most important reasons to always rinse your gear and store it well, is that it gives you an opportunity to inspect every piece for loss or damage BEFORE you are on the back on the beach or boat for your next dive and discover you are short a glove, or you have blown an O ring, or that mask strap has finally torn in half. Most divers carry a “save a dive kit”, but it’s been my experience when you are in a hurry and something is broken or missing, it’s always the ONE thing you don’t have a spare for.

Having your gear rinsed, dried, inspected and put away properly means you are ALWAYS ready for that last minute or unexpected opportunity to go diving, fully confident that everything is present and working, and you won’t have that embarrassing moment when everyone else is ready to jump in and one small lost or broken item ruins your day.

Diver Profile: Brian Pallock

Diving since: 1989
Total number of dives: 1500+
Favourite Quotes:
“Fact isn’t just the flavour of the day or someone’s opinion based on their limited experience…” – BP
“Seek not greatness, but seek truth and you will find both.” – Horace Man


NAUI Open Water, Advanced, Rescue and Dive Master

Instructor Ratings: NAUI OWSI, PADI MSDT, SDI OWSI, TDI Advanced Nitrox and Deco Procedures,
as well as multiple Instructor specialties from DAN, PADI and SDI

NACD and IANTD Full Cave Certified , Trimix


Canada –  Ontario & the Great Lakes, Nova Scotia, PEI; USA – Cape Ann, Florida (Keys and Caves),Bonne Terre;  Belize; Mexico – Mayan Caves & Cozumel, Aruba, Curacao and all over the Bahamas


Brian grew up as a farm boy helping his family grow apples and vegetables for their farm market. His interest in diving began in his youth when he spent hours snorkeling at his parent’s cottage or simply jumping in the water while out fishing with his Mom and Dad to see what there was under the waves. Television specials from National Geographic and Jacques Cousteau fueled this curiosity and he became certified as an open water diver in 1989, following formal schooling in Mechanical Engineering and adult training.

Following his diving certification he pursued the sport with a passion becoming active in the local Ontario diving scene, helping to run several dive clubs, including the Dolfin Divers, Great Lakes Scuba Club and the Durham Divers and he continues to be a strong supporter and sponsor of local dive clubs and the role they play in mentoring new divers.

In 1996 Brian opened Dive Source Scuba in Whitby – Ontario, later moving to Oshawa in 2004 where it has grown to become one of the premier shops in the Province of Ontario. Dive Source is a full service PADI Five Star Dive Centre which teaches hundreds of divers annually and employs a staff of over 30 dive professionals and store staff and acts as an anchor for the dive community in Durham Region and the GTA (Greater Toronto Area).

Supported by his family and a talented and friendly staff, Dive Source continue to bring innovation and passion to the sport of scuba diving with Brian at the helm. When not diving Brian enjoys golf, fishing, writing, photography and the outdoors which ties in well to his role as scuba diving adviser and occasional guest on the FishnCanada Television show.

Benefits of Owning Your Own Gear

I often think of the difference between men and women on the approach to buying and renting, when my friends and now my kids and their friends get married. I have never known a groom who went out and bought a tux to wear for three hours, and have never seen a bride in a rented gown. (Not saying it doesn’t happen; just have never seen it myself.)

It’s partly a practical choice, and partly an emotional one. Go to a tool rental shop and you’ll find all kinds of great and handy devices that you may only ever need ONCE for one job and that job pretty much can’t be done without it. You know you will pay about ten percent of the value of the tool, but you are pretty sure you won’t use it nine more times in the next ten years, so it makes sense to rent.

Now, with dive gear, to become a scuba diver you have to take a fairly expensive course, and invest your valuable time to get certified to enjoy our great sport. It’s probably not something you did on a whim, you thought about it for a long time, or a friend has got you interested, but the point is you made a commitment. The dive industry has known for years that the dropout rate of divers who invest in their own gear is lower than those who don’t. Who wants to wear a wetsuit that 500 others have worn before you, or have a regulator in your mouth under the same circumstances?

Dive gear is a life support system that is your gateway to one of the most exciting experiences on the planet. When you are 100 feet underwater having a great time, it can be hard to imagine that you are a fifty cent part away from being exposed to an environment that is as hostile to the human body as outer space.

When you own your own gear, you spend the time to get every piece of it adjusted and configured EXACTLY the way you like it. It becomes like an old friend; an old pair of slippers that just slide on easily every time. There are no surprises, and your task loading on the dive prep is much lower – especially if you are on a boat full of divers you don’t know, and some piece of unfamiliar rental gear starts giving you grief.

In cold water, it’s really hard to enjoy the beauty when your rented dry suit leaks, or wetsuit is just not keeping you warm. For the travelling diver, in the face of recent massive airline restrictions and fees, most manufacturers have introduced high quality lightweight gear. I recently flew halfway around the world to dive in Australia. I took every piece of my own gear, except for weights.

I geared up in a couple of minutes, everything fit, I knew where it all was and how it worked, and the second I hit the water I forgot about and enjoyed my dives. If you want to truly enjoy diving and stay in for the long haul, go buy some gear….